Interior Cladding & Structural Steel Spraying

industrial spraying applied by Cheshire Resin Flooring North West industrial spraying applied by Cheshire Resin Flooring North West

Interior Cladding & Structural Steel Spraying

We offer the most effective and economical solution to restore interior cladding & structural steel, which will brighten up large warehouses, industrial & retail units and factories.
When we spray your cladded interiors they will look as good as new, We use a unique waterbased product called Elite Dryfall. The Elite Dryfall system surpasses the adherence and hiding power of standard coatings. This enables us to complete your projects within time, to a higher standard, which is well within budget.
For heavily stained interior cladding and structural steel we use a product called Elite DTM. Elite DTM offers excellent adherence but also offers stainblocking properties unmatched by any other product on the market. Elite DTM is self priming on cladding and steel and also incorporates a rust inhibitor.
We can spray your cladding or structural steel to any RAL or BS colour code, we also offer different sheen levels. The products are suitable to be cleaned by power washing if required for future maintenance.
Using these specialist coating systems enables Pristine to easily spray out large interior cladded areas fast and efficiently to the highest of standards, whilst remaining very competively priced.
The benefits of using us to restore your interior cladding include:
• Fast and efficient nation-wide service
• Zero VOC, completely safe ecological coatings.
• Superior adhesion
• Very high reflectance values that will improve working conditions.
• Long Lasting, maintainable finish.
• spray application offers a superior cosmetic finish.
• up to 500m2 restored by one team per shift.

Elite DTM for heavily-stained interior cladding and structural steel.

This unique product is a self priming, solvent based interior / exterior coating with additional rust inhibitors for added protection with excellent light reflectance, Elite DTM has excellent stain covering properties, perfect for interiors of industrial units, factories & warehouses. Excellent adhesion, washable & stain resistant.
Where to Use: Structural steel non-ferrous metal, galvanised steel. Enamelled wall panels, aluminium, stainless steel, powder coated substrates, bare or factory finished interior & exterior cladding
Properties: •Excellent stain covering, •Ideal for Interior Exterior Applications •Fast drying, rapid application •Excellent productivity •Self priming finish coat •Durability •washable •Will not flake or peel •Excellent light reflectance, Specification Preparation: Brush down the surface to remove all dust, cobwebs etc, de-grease any heavy contamination, spot prime any bare steel, mask up if product to be applied by spray.
Application: Elite DTM can be applied by brush, roller or airless spray, If applied by airless spray use a 0.11 to 0.13 tip, do not dilute. apply one full coat overlapping each pass by 50%. This should be sufficient. However depending on the substrate a further mist coat may be required to complete the project. Completion: Clean brush, roller & machine with white spirit, clean area ready for re-occupation.
Technical data: Colour White as standard but can be supplied in any RAL or BS colour Solids 40% Spread rate 8m² per litre depending on WFT Required. Dry to touch 2 hour Recoat after 24 hours Clean-up Warm Soapy Water Flash Point 64’C WFT between 100 & 200microns

To return to Industrial Spraying Home Page Click here

Call now on 01625-879508

Optimized with PageSpeed Ninja