Welcome to the Cheshire Resin Flooring on-line shop.

Buy resin coatings for self-application on-line here!

All products listed in the shop are suitable for easy application without specialist skills provided health and hygiene instructions are observed. All prices are subject to VAT. Delivery is included to mainland UK destinations. Coverage rates are based on those normally obtained but will vary with levels of contour and/or porosity.

A primer coat is always required for very porous surfaces. To help you decide what you require, some standard specifications for general usage are submitted below but if you need more help, please do not hesitate to call us on 01625-879508.

Coloured Epoxy Resin Floor Coatings. click here

Clear Epoxy Resin Floor Coatings. click here

Epoxy Resin DPM Coating. click here

Concrete Repair Kit and Tool-cleaning Solvent. click here

Cleaning and Degreasing Solutions. click here

STANDARD SPECIFICATIONS

– The specification detailed below are all based on products available from this web shop.

LIGHT DUTY INDUSTRIAL USAGE

two coats of WB EPOXY COATING ,each coat applied at approx. 7-8 sq. m. per kg, per coat. For an anti-slip finish, an additional primer coat of WB PRIMER will be needed, applied at approx. 6-7 sq. m. per kg. A light scatter of BAUXITE 0.5MM bauxite aggregate should be applied onto the second coat whilst wet at approx. 7-9 sq. m. per kg.

MEDIUM DUTY INDUSTRIAL USAGE

two coats of SF EPOXY COATING, each coat applied at approx. 5 sq. m. per kg, per coat. In areas subject to high chemical attack, use SFCR EPOXY COATING, each coat applied at approx. 5 sq. m. per kg, per coat. For an anti-slip finish, an additional primer coat of SF PRIMER will be needed, applied at approx. 5 sq. m. per kg. A light scatter of BAUXITE 0.5MM bauxite aggregate should be applied onto the second coat whilst wet at approx. 5-6 sq. m. per kg.

HEAVY DUTY INDUSTRIAL USAGE

two coats of SFHB EPOXY COATING, Each coat applied at approx. 3 sq. m. per kg, per coat. For an anti-slip finish, an additional primer coat of SF PRIMER will be needed, applied at approx. 5 sq. m. per kg. A light scatter of BAUXITE 1.2MM bauxite aggregate should be applied onto the second coat whilst wet at approx. 3-4 sq. m. per kg.

To go to main shop click here